WASHERS

Washers are designed for assembly around a bolt or screw, between the bearing surface or the fastener and the part which it is attached. Flat washers are used to improve stress distribution, and span large clearance holes. Locking washers are used to resist loosening caused by vibration and corrosion. I.T.P. sells USS, SAE, and Fender washers by the pound. I.T.P. can also provide special and critical tolerance washers at a very competitive cost with utilizing our diverse supply chain of local and international stamping factories.

Click on a section heading below to access additional product information.


PRODUCT TYPES


A325/A490 Hardened Washer Bevel Washer Fender Washer Split Washer Steel Square Plate USS/SAE

PRODUCT CHART


ITP P/NWeight C/1001/4 Keg QtySizeDescriptionNOTE
50NWUS50#1300 pcs1/2"USS Flat Washers, Plain 
62NWUS50#650 pcs5/8"USS Flat Washers, Plain 
75NWUS50#455 pcs3/4"USS Flat Washers, Plain 
87NWUS50#325 pcs7/8"USS Flat Washers, Plain 
100NWUS50#265 pcs1"USS Flat Washers, Plain 
112NWUS50#225 pcs1 1/8" USS Flat Washers, Plain 
125NWUS50#190 pcs1 1/4"USS Flat Washers, Plain 
150NWUS50#130 pcs1 1/2"USS Flat Washers, Plain 
      
50NWUSZ50#1300 pcs1/2"USS Flat Washer, Zinc 
62NWUSZ50#650 pcs5/8"USS Flat Washer, Zinc 
75NWUSZ50#455 pcs3/4"USS Flat Washer, Zinc 
87NWUSZ50#325 pcs7/8"USS Flat Washer, Zinc 
100NWUSZ50#265 pcs 1"USS Flat Washer, Zinc 
112NWUSZ50#225 pcs1 1/8" USS Flat Washer, Zinc 
125NWUSZ50#190 pcs1 1/4"USS Flat Washer, Zinc 
150NWUSZ50#130 pcs1 1/2"USS Flat Washer, Zinc 
      
50NWUSG50#1300 pcs1/2"USS Flat Washer, H.D.G. 
62NWUSG50#650 pcs5/8"USS Flat Washer, H.D.G. 
75NWUSG50#455 pcs3/4"USS Flat Washer, H.D.G. 
87NWUSG50#325 pcs7/8"USS Flat Washer, H.D.G. 
100NWUSG50#265 pcs 1"USS Flat Washer, H.D.G. 
112NWUSG50#225 pcs1 1/8" USS Flat Washer, H.D.G. 
125NWUSG50#190 pcs1 1/4"USS Flat Washer, H.D.G. 
150NWUSG50#130 pcs1 1/2"USS Flat Washer, H.D.G. 
    SQUARE PLATE WASHER  
50N200WSQ/1820.402501/2" (Bolt)9/16 x 2 x 2 x 3/16 
50N300WSQ/25 1001/2" (Bolt)9/16 x 3 x 3 x 1/4 
62N200WSQ/1824.002505/8" Bolt11/16 x 2 x 2 x 3/16 
62N250WSQ/2542.001005/8" Bolt11/16 x 2 1/2 x 2 1/2 x 1/4 
62N300WSQ/25 1005/8" Bolt11/16 x 3 x 3 x 1/4 
75N275WSQ/3163.00803/4" Bolt13/16 x 2 3/4 x 2 3/4 x 5/16 
75N300WSQ/25 1003/4" Bolt13/16 x 3 x 3 x 1/4 
87N300WSQ/31108.00707/8" Bolt15/16 x 3 x 3 x 5/16 
100N350WSQ/37115.00401" Bolt1 1/16 x 3 1/2 x 3 1/2 x 3/8 
87N300WSQ/50 407/8" Bolt15/16 x 3 x 3 x 1/2 
112N400WSQ/50 201 1/8 Bolt1 3/16 x 4 x 4 x 1/2  
    SQUARE PLATE WASHER HDG 
50N200WSQG/1820.402501/2" Bolt9/16 x 2 x 2 x 3/16 HDG 
50N300WSQG/26 1001/2" (Bolt)9/16 x 3 x 3 x 1/4 hdg 
62N200WSQG/1824.002505/8" Bolt11/16 x 2 x 2 x 3/16 HDG 
62N250WSQG/2542.001005/8" Bolt11/16 x 2 1/2 x 2 1/2 x 1/4 HDG 
62N300WSQG/26 1005/8" Bolt11/16 x 3 x 3 x 1/4 hdg 
75N300WSQG/25 1003/4" Bolt13/16 x 3 x 3 x 1/4 hdg 
    SLOTTED SQUARE PLATE WASHER 
50N300WQS/2554.41001/2" Bolt9/16 x 3 x 3 x 1/4 PLAIN 
62N300WQS/2553.21005/8" Bolt11/16 x 3 x 3 x 1/4 PLAIN 
75N300WQS/2554.41003/4" Bolt13/16 x 3 x 3 x 1/4 PLAIN 
      
50N300WQSG/2554.41001/2" Bolt9/16 x 3 x 3 x 1/4 HDG 
62N300WQSG/2553.21005/8" Bolt11/16 x 3 x 3 x 1/4 HDG 
75N300WQSG/2554.41003/4" Bolt13/16 x 3 x 3 x 1/4 HDG 
      
50NWMI19.452571/2"Mall Iron Washer, Plain 
62NWMI26.521815/8"Mall Iron Washer, Plain 
75NWMI36.591383/4"Mall Iron Washer, Plain 
87NWMI55.55907/8"Mall Iron Washer, Plain 
100NWMI72.91721"Mall Iron Washer, Plain 
      
50NWMIG19.452571/2"Mall Iron Washer, H.D.G. 
62NWMIG26.521815/8"Mall Iron Washer, H.D.G. 
75NWMIG36.591383/4"Mall Iron Washer, H.D.G. 
87NWMIG55.55907/8"Mall Iron Washer, H.D.G. 
100NWMIG72.91721"Mall Iron Washer, H.D.G.

PRODUCT DOWNLOADS